DODGE DAKOTA (2001-2004) (A/TONLY) DODGE DURANGO (2001-2003) (A/TONLY) PARTNUMBER: DG-71-01 Pro.Fit logo and part numberwill be right side up and readable when installed. TOOLS REQUIRED : Torx T-15 driver, 7mm socket and driver, 5/64″ drill bit and drill,#2 Phillips screwdriver, hook tool, protective cloth, marking pen, small file or Exacto Knife (for 2003 models only). PARTS INCLUDED : Pro.Fit VSM® , instructions, two (2) # 8 x 1/2″ screws. LOCATION : Below the radio STEP1. Open the driver’s side door and locate …
STEP1. Open the driver’s side door and locate the fuse panel on the left end of the dash. Remove the panel’s cover by using the finger hole and pulling outward. Next, remove the panel under the steering column. Locate and remove three (3) #15 Torx screws from the bottom edge of the panel. The top of the panel is held in place by three (3) clips (see photo #1) that release by pulling the panel out towards you. STEP2. Remove the two (2) 7mm screws located in the uppermost portion of the instrument cluster.
This new Durango's spacious cabin offers premium soft-touch materials front-to-rear regardless of trim level. Interior design chief Klaus Busse calls it "friendly all the way back to the third row, with nice, soft edges throughout." An interactive Electronic Vehicle Information Center (EVIC) provides a variety of useful information, and the new instrument panel offers a choice of monotone or two-tone trim with dark upper and lighter lower colors.
Twenty-eight different seating configurations are offered in the 2011 Durango, and cargo room extends to a maximum 85 cubic feet with both second- and third-row seats folded flat. The front seats offer four-way lumbar adjustments and can be warmed or cooled with heating and ventilating options. A fold-flat front passenger seat can be combined with the 60/40 split-folding (and reclining) second-row and 50/50 third row providing room for long items.
0 comments:
Post a Comment